Von Duprin QEL9947L-DT-05 3 US26 RHR Exit Device Bright Chrome

• Device functions: Device ships EO/DT/NL. Field selectable. For TP, K or L remove NL drive screw from device.
• Device lengths: 2′ 2″ (610 mm) Door size (shipped less UL label) 3′ 2’4′ to 3′ (711mm to 914 mm) Door size 4′ 2’10” to 4′ (864 mm to 1219 mm) Door size
• Device centerline from finished floor: 395 /8″ (1006 mm) Standard Adjustable from 355 /8″ (905mm) to 495 /8″ (1260mm)
• Center case dimensions: 8″ x 2 3/4″ x2 3/8″ (203mm x 70mm x 60mm)
• Mechanism case dimensions: 2 1/4″ x 2 1/4″ (57mm x 57mm)
• Projection: Pushbar neutral 3 13/16″ (97 mm) Pushbar depressed 3 1/16″ (78 mm)
• Latch bolt: Deadlocking top & bottom bolt, 5 /8″ (16mm) throw
• Door undercut: 1 /4″ (7mm) recommended
• Top & bottom Latch case: 4 1/2″ x 2 1/8″ x 1 1/2″ (114mm x 54mm x 38mm)
• Vertical rods: Round 2-piece adjustable rods Top rod adjustable from 6’8″ (2027mm) to 8’4″(2533mm). Bottom rod adjustable 35 5/8″ (905 mm) to 49 5/8″ (1260 mm). Extension rod kits available for doors over 8’4″ (2533mm).
• Fasteners & sex bolts (SNB): Includes screw pack for 1 3/4″ (44mm) to 2 1/4″ (57mm) thick metal doors. Optional 425 SNB available.

Base Material

Zinc

Trim Type

Dummy Lever

Physical Appearance

Wide Stile Pushpad

Package Qty

1

Includes Trim

Yes

Electric Options

Electric Latch Retraction

Device Type

Concealed Vertical Rod

Trim Design

05 – Lever

Fire Rated

No

Device Length

36 In.

Color Code

681/US26

Color

Bright Chrome

Hand

RHR

Grade

Grade 1

Handing

Right Hand Reverse

Product Overview

Quiet Electronic Latch Retraction, Concealed Vertical Rod Device, Dummy Lever Trim, Bright Chrome

9847/9947 Concealed vertical rod device for use on single or double metal doors, UL listed for panic exit hardware. Devices are ANSI A156.3 – 2008 Grade 1. The 9847 device has a smooth mechanism case and the 9947 device has a grooved case. The concealed vertical rod device is non-handed except when the following device options are used: SD (special dogging), or SS (signal switch). See opposite page for available outside trim and device functions.

Device ships EO/DT/NL. Field selectable. For TP,K,or L remove NL drive screw from device.

The 9947 Series by Von Duprin is UL listed for panic exit hardware. Devices are ANSI A156.3 – 2008 Grade 1. The 9947 device has a grooved case and comes in several available finishes.