SureClose Double Action Weld-On HingeSureClose Double Acting Self-Closing Hinge 57-W

• NOTE: Post mounting brackets sold separately. The recommended setup requires two hinges and two mounting brackets.
• SureClose Double Acting Hinges for weld-on applications.
• Allows a gate to swing 90 degrees in either direction.
• Made for center mount applications.
• Requires minimum post size of 2-1/2″ x 2-1/2″
• Self-closing or non-self closing versions available.
• Self-closing version closes from 0 to 85 degrees and holds open from 86-90 degrees.
• Hold open feature renders this hinge not suitable for child/pool safety.
• See swing diagram above for a clear visual representation of this info.
• Hydraulics are concealed within the post, providing a controlled and quiet close in a tamper resistant design that will not leak.
• Adjustable self-closing speed.
• Does not offer resistance if closed quickly in an emergency.
• Features dual thrust ball bearings to help withstand heavy loads.
• Hinge gap between frame and gate is adjustable, from 2-1/2″ – 3″.
• Pre-threaded post mounting brackets allow for horizontal adjustment.

These hinges can be used in any of the following combinations:

• Use 2 of our SKU 928544 to self-close a gate up to 180 pounds*.
• Use 1 of our SKU 928544 and 1 of SKU 928542 to self-close a gate up to 90 pounds*.
• Use 2 of our SKU 928542 to hold a gate up to 1500 pounds* (will not self-close).
• * Weight ratings based on a maximum gate size of 72″ high x 40″ wide.

Furniture Hinges