Blum Compact 38N Small Overlay Hinges1/2″ Overlay Blum Compact 38N Hinge

• The mounting plate and hinge are combined in one unit.
• The mounting plate side of the hinge does requires a single #10 mounting screw which is not included. Screws are available under related products. Only one screw is needed per hinge
• For face frame cabinets with a 3/4″ face frame thicknesses.
• The hinge is adjustable after installation plus or minus 1/8″ in height, plus or minus 1/16″ side to side, and plus 3/32″ and minus 1/32″ depth.
• Installs in a 35mm (1-3/8″) diameter cup drilled in the back of the door.
• This hinge features a shallow cup depth (7/16″). This is useful for doors with a deep profile cut on the outside edge of the door.
• Bore distanceis 1/8″. The bore distance is the distance between the edge of the door and the edge of the 35mm cup drilled in the back of the door. This dimension is a standard dimension for all compact European hinges.
• Available in 4 different overlays. If you are replacing hinges, your present overlay will be stamped on the old hinge. If you need to determine the overlay dimension of your door, view the link found under Resources for measurement instructions.
• The hinge side comes with screws and press-in dowels. If your installation does not use “press in” dowels you can remove the dowels and use the wood screws provided.

Cabinet Hinges