Von Duprin EL3527A-EO 3 26D Exit Device Satin Chrome

• Device lengths: 2′ 2′ (610 mm) Door size 3′ 2’4″ to 3′ (660mm to 914 mm) door size 4′ 2’8″ to 4′ (813 mm to 1219 mm) door size
• Device centerline from finished floor: 39 13/16″ (1006mm) Center case dimensions 8 13/16″ x 2 13/32″ x 1 9/16″ (208mm x 62mm x 40mm)
• Mechanism case dimensions: 2 1/4″ x 2 1/4″ (57mm x 57mm)
• Projection: Pushbar neutral 3 13/16″ (97 mm) Pushbar depressed 3 1/16″ (78 mm)
• Latch bolt: Deadlocking anti-friction top & bottom bolt 5 /8″ (16mm) throw
• Door undercut: 1 /4″ (7mm)
• Top & bottom latch: 4 1/2″ x 2 1/8″ x 1 1/2″ (114mm x 54mm x 38mm)
• Vertical rods: 1 /2″ square tubing, standard rods accommodate 7′(2134mm) door Top rod length is 34 15/16″ (887mm) Bottom rod length is 31 1/4″ (794mm) Extension rods available 1′ (205mm) or 3′ (914mm) for doors over 7′ One piece top rod available for 8′ (2438mm) -10′ (3048mm) door
• Fasteners & sex bolts (SNB): Includes 1 3/4″ (44mm) 2 1/4″ (57mm) wood & metal doors #425 SNB furnished standard for end case #325 SNB furnished standard for EO (exit only device) #325 SNB furnished for top and bottom latches

Color

Satin Chrome

Physical Appearance

Narrow Stile Pushpad

Grade

Grade 1

Fire Rated

No

Device Type

Surface Vertical Rod

Package Qty

1

Includes Trim

No

Device Length

36 In.

Electric Options

Electric Latch Retraction

Color Code

626/US26D

Base Material

Brass or Bronze

Product Overview

Surface Vertical Rod Exit Device, Exit Only, No Trim, Electronic Latch Retraction, Satin Chrome

3327A and 3527A for all types of single and double doors, UL listed for panic exit hardware. Devices are ANSI A156.3 – 2001 Grade 1. The 3527A has a smooth mechanism case and the 3327A has grooved case. The surface vertical rod device is non-handed except when the SS (signal switch) option is used. See opposite page for available outside trim and device functions.

For all types of single and double doors, UL listed for panic exit hardware.

The surface vertical rod device is non-handed except when the SS (signal switch) option is used.